Paradyne 4200 Uživatelský manuál stáhnout pdf (Strana 58)

100

101

3. ADSL Facility Commands

3-22

August 2002 4200-A2-GB20-00

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following

acknowledgment response is sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

M c COMPLD

/* ED-PROFILE-ADSLUPALM:[tid]:adsl_profile_id:[ctag]:::

[adslprof_nblk] */

;

Error Response:

sid yy-mm-dd hh:mm:ss

M c DENY

/* ED-PROFILE-ADSLUPALM:[tid]:adsl_profile_id:[ctag]:::

[adslprof_nblk] */

errcde

;

[adslprof_nblk]

(continued)

DECRATE-F: Decreasing Rate (fast channel). SNMP rate change trap

and TL1 autonomous message are sent if the current rate is ≤ the

previous rate minus this threshold (0-2176 kbps in 32 kbps increments,

where 0 disables the messages). The default is 0.

INITFAIL: Initialization Failure. Enables or disables InitFailureTrap

messages specified in RFC 2662.

– Y: Enable Initialization Failure Trap messages only.

– N: Disable Initialization Failure Trap messages only (Default).

If not specified, the values of these parameters remain unchanged.

Table 3-17. ED-PROFILE-ADSLUPALM Command Parameters (2 of 2)

ED-PROFILE-ADSLUPALM:[tid]:adsl_profile_id:[ctag]:::[adslpr

of_nblk];

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 381 382

Komentáře k této Příručce

Žádné komentáře

Paradyne 4200 Uživatelský manuál Strana 58

Komentáře k této Příručce

Související produkty a manuály pro Software Paradyne 4200