Paradyne 4200 Uživatelský manuál Strana 368
- Strana / 382
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
C. Traps and MIBs
C-44
August 2002 4200-A2-GB20-00
Paradyne Time MIB (pdn_Time.mib)
The Paradyne Time MIB (pdn_Time.mib) controls the date and time on the unit.
Paradyne mpe_ATMConf.mib
This MIB is used for configuration of ATM-specific objects that are not available
through the standard MIB RFC 2515.
Table C-23. Paradyne Time MIB Objects
Object Description Setting/Contents
devDateAndTime Displays the unit’s date and time and
allows the NMS to change them to the
appropriate time zone.
Read/write.
devNTPServerIP Allows an NMS to configure the NTP
server and IP address.
Read/write.
devNTPMode Allows an NMS to configure the NTP
mode.
Read/write. Valid Values are:
Unicast: NTP polls a specific server. The
NTP server must have been configured
using the NTPServerIP object.
Broadcast: NTP broadcasts a request and
any NTP server can respond.
Table C-24. Paradyne mpe_ATMConf.mib
Object Description Setting/Contents
mpeAtmLoopbackLocationCode Identifies this module for the purpose of
OAM f5 loopback.
Read/write.
entPhysicalIndex The physical index of the card in the
DSLAM.
Not accessible.
- GranDSLAM 1
- ATM Stackable DSLAM 1
- 4 DS1 Facility Commands 6
- 5 ATM Commands 6
- 6 Cross Connect Commands 7
- 7 Equipment Commands 8
- 8 IP Access Commands 8
- 9 Performance Commands 9
- 10 Fault Commands 10
- 11 Log Commands 11
- 12 Security Commands 11
- 13 Synchronization Commands 12
- 14 System Commands 13
- 15 Test Commands 14
- AError Codes 15
- B Command Cross Reference 15
- C Traps and MIBs 16
- Contents 17
- 4200-A2-GB20-00 August 2002 17
- August 2002 4200-A2-GB20-00 18
- About This Guide 19
- Product-Related Documents 20
- 02-17294 24
- Features 25
- Overview 27
- TL1 Command Language 27
- Command Code 28
- Parameters 29
- Output Messages 29
- Command Entry Features 30
- User Access Privilege Levels 31
- Logging In 31
- Procedure 33
- ADSL Facility Commands 37
- ACT-PROFILE-ADSL 38
- ACT-PROFILE-ADSLALM 40
- DLT-PROFILE-ADSL 42
- DLT-PROFILE-ADSLALM 44
- ED-ADSL 46
- ED-PROFILE-ADSLDN 50
- ED-PROFILE-ADSLDNALM 52
- ED-PROFILE-ADSLUP 55
- ED-PROFILE-ADSLUPALM 57
- ENT-PROFILE-ADSL 60
- ENT-PROFILE-ADSLALM 62
- REPT ALM ADSL 64
- REPT EVT ADSL 66
- RTRV-ADSL 68
- RTRV-ATUR 71
- RTRV-PM-ADSL 73
- RTRV-PROFILE-ADSL 76
- RTRV-PROFILE-ADSLALM 78
- RTRV-PROFILE-ADSLDN 80
- RTRV-PROFILE-ADSLDNALM 83
- RTRV-PROFILE-ADSLUP 86
- RTRV-PROFILE-ADSLUPALM 89
- 3. ADSL Facility Commands 92
- DS1 Facility Commands 93
- ED-T1 94
- ENT-T1 97
- REPT ALM T1 100
- REPT EVT T1 101
- REPT-OPSTAT-T1 102
- Example 103
- Related Commands 103
- RTRV-PM-T1 104
- Response Format 105
- Related Command 106
- RTRV-T1 107
- Normal Response: 108
- Error Response: 108
- Parameter Explanation 109
- ATM Commands 111
- DLT-PROFILE-TRAFDSC 112
- DLT-VCL 114
- ED-ATMPORT 116
- ENT-PROFILE-TRAFDSC 118
- ENT-VCL 120
- RTRV-ATMPORT 123
- RTRV-PROFILE-ATMACC 126
- RTRV-PROFILE-TRAFDSC 129
- RTRV-VCL 131
- 5. ATM Commands 134
- Cross Connect Commands 135
- DLT-CRS-VC 136
- ED-CRS-VC 138
- ENT-CRS-VC 141
- RTRV-CRS-VC 144
- Equipment Commands 147
- ED-EQPT 148
- REPT ALM EQPT 150
- REPT EVT EQPT 151
- RTRV-EQPT 152
- RTRV-INV-EQPT 155
- 7. Equipment Commands 158
- IP Access Commands 159
- DLT-ATMARPENT 160
- DLT-IPPORT 162
- ED-IPPORT 164
- ENT-ATMARPENT 167
- ENT-IPPORT 169
- REPT-OPSTAT-IPPORT 172
- RTRV-ATMARPENT 175
- RTRV-IPPORT 177
- 8. IP Access Commands 180
- Performance Commands 181
- REPT-OPSTAT-ADSLCOM 182
- Examples 184
- REPT-OPSTAT-ADSLDN 185
- REPT-OPSTAT-ADSLUP 187
- REPT-OPSTAT-VCL 190
- Fault Commands 193
- RTRV-ALM-ADSL 194
- RTRV-ALM-ALL 197
- RTRV-ALM-EQPT 201
- RTRV-ALM-T1 204
- RTRV-ATTR-ADSL 207
- RTRV-ATTR-ALL 210
- RTRV-ATTR-EQPT 214
- RTRV-ATTR-T1 217
- RTRV-COND-ADSL 220
- RTRV-COND-ALL 223
- RTRV-COND-EQPT 227
- RTRV-COND-T1 230
- Log Commands 233
- INIT-LOG 234
- RTRV-LOG 236
- 11. Log Commands 238
- Security Commands 239
- DLT-USER-SECU 240
- ED-CID-SECU 242
- ED-USER-SECU 246
- ENT-USER-SECU 248
- RTRV-CID-SECU 250
- RTRV-USER-SECU 252
- 12. Security Commands 254
- Synchronization Commands 255
- ED-SYNCN 256
- RD-SYNCN 258
- RTRV-SYNCN 260
- 13. Synchronization Commands 262
- System Commands 263
- ACT-USER 264
- ALW-MSG-ALL 266
- CANC-USER 268
- CPY-FILE 270
- INH-MSG-ALL 271
- INIT-SYS 273
- LOGOFF 275
- RTRV-HDR 277
- RTRV-MEM 279
- RTRV-META-AID 281
- RTRV-META-CMD 283
- RTRV-META-SYN 285
- RTRV-NE-ALL 287
- SET-DAT 291
- SET-NE-ALL 293
- SET-SID 297
- Test Commands 299
- OPR-LPBK-T1 300
- OPR-LPBK-VCL 302
- RLS-LPBK-T1 305
- RLS-LPBK-VCL 307
- STA-LAMPTST 309
- STP-LAMPTST 311
- Error Codes 313
- Error Code Type Description 314
- Command Cross Reference 315
- ACT Commands 316
- ALW Commands 316
- CANC Commands 316
- CPY Commands 316
- DLT Commands 317
- ED Commands 317
- ENT Commands 318
- INH Commands 319
- INIT Commands 319
- LOGOFF Commands 319
- OPR Commands 319
- RD Commands 320
- REPT Commands 320
- RTRV Commands 321
- Command See . . 322
- SET Commands 323
- STA Commands 323
- STP Commands 323
- B. Command Cross Reference 324
- Traps and MIBs 325
- SNMP Traps 326
- (continued) 327
- MIBs Overview 329
- Standard MIBs 329
- MIB II (RFC 1907) 330
- MIB II (RFC 1213) 331
- MIB II (RFC 2863) 332
- ATM MIB (AtoM) (RFC 2515) 337
- MIB Group Objects 340
- ATM Forum MIB 342
- Table, ATM Forum M4 343
- Table Object 343
- Table Objects Contents 351
- DS1 MIB (RFC 2495) 357
- Paradyne Enterprise MIBs 360
- Paradyne mpe_ATMConf.mib 368
- Paradyne DS1 Extension MIB 370
- Hotwire 6390 ReachDSL Modem 371
- Download 371
- 02-17296 372
Související produkty a manuály pro Software Paradyne 4200
Software Paradyne 9720 Uživatelský manuál
(340 stránky)
(340 stránky)
Software Paradyne 6302 Uživatelský manuál
(146 stránky)
(146 stránky)
Software Paradyne FrameSaver SLV 9664 Uživatelský manuál
(240 stránky)
(240 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce