Paradyne 4200 Uživatelský manuál stáhnout pdf (Strana 373)

100

101

D. Hotwire 6390 ReachDSL Modem Download

4200-A2-GB20-00 August 2002

D-3

Procedure

To create a PVC from the GrandDSLAM 4200 port to the Hotwire 6390 ReachDSL

modem:

1. Log into the GranDSLAM 4200 unit using the

ACT-USER

command.

For example, type:

ACT-USER:TAMPA:SUPERUSER:100::********

2. Create a VCL to the upstream network (on the NT) with VPI=1 and VCI=33

using the

ENT-VCL

command.

For example, type:

ENT-VCL:TAMPA:NTVCL-1-33:100::1,1;

3. Create a VCL to the Hotwire 6390 ReachDSL Modem attached to Port 1 (on

the LT) with VPI=0 and VCI=33 using the

ENT-VCL

command.

For example, type:

ENT-VCL:TAMPA:LTVCL-1-1-1-1-0-33:100::1,1;

4. Create a cross connection between the upstream ATM network (NT) and

Port 1 (LT) using the

ENT-CRS-VC

command.

For example, type:

ENT-CRS-VC:TAMPA:NTVCL-1-33,LTVCL-1-1-1-1-0-33:100::::IS;

5. Define a management PVC path across the ATM network to reach the

GranDSLAM 4200 1/33 uplink management PVC using 1483 routed

encapsulation.

6. Assign a Gateway IP address of 135.26.95.6/29 (where 29 is 29 bits in the

subnet mask), if needed, to the router port.

7. Ping the Hotwire 6390 ReachDSL Modem Management IP address

(135.26.95.1) from the network side.

1 2 ... 368 369 370 371 372 373 374 375 376 377 378 ... 381 382

Komentáře k této Příručce

Žádné komentáře

Paradyne 4200 Uživatelský manuál Strana 373

Komentáře k této Příručce

Související produkty a manuály pro Software Paradyne 4200