Paradyne M/HDSL Standalone Termination Unit Hotwiret 7986 Uživatelský manuál stáhnout pdf (Strana 8)

7986-A2-GZ40-00

March 1999

Table 2. G.703 Interface Options

Port Status

Possible Settings: Enable, Disable

Default Setting: Enable

Determines whether the port can be configured and used.

Framing

Possible Settings: Framed, Unframed

Default Setting: Framed

Determines whether G.704 framing is used for the G.703 interface.

Line Coding Format

Possible Settings: AMI, HDB3

Default Setting: HDB3

Specifies the line coding format to be used by the G.703 interface.

Line Framing

Possible Settings: CRC4, noCRC4

Default Setting: noCRC4

Specifies the framing format to be used by the G.703 interface.

Time Slot 16

Possible Settings: Signaling, Data

Default Setting: Signaling

Specifies whether the G.703 interface is used for voice or data.

Send AIS on Network Failure

Possible Settings: Enable, Disable

Default Setting: Enable

Specifies the action taken on the signal transmitted to the G.703 when a valid signal

cannot be recovered from the network interface (LOS or cognitions OOF, AIS, or EER).

Primary Clock Source

Possible Settings: G.703, Internal

Default Setting: Internal

Specifies where the unit will derive its timing from.

Secondary Clock Source

Possible Settings: G.703, Internal

Default Setting: Internal

Specifies where the unit will derive its timing from if the primary clock fails.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Žádné komentáře

Paradyne M/HDSL Standalone Termination Unit Hotwiret 7986 Uživatelský manuál Strana 8