Paradyne COMSPHERE 3800 Series Modems 3810 Uživatelský manuál Strana 87
- Strana / 204
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Configure Branch
9-253810-A2-GB30-20 November 1996
Table 9-3
(6 of 6)
Line Dialer Configuration Options
MI/MIC Dialing: Disable
End Disable Enable
MI/MIC Dialing. Also known as D-Lead signaling, is required by some PBX systems, older data phones, and security
callback systems. It forces the modem into the originate handshake after first dialing a call.
Disable – Modem ignores activity on the MI/MIC contacts.
Enable – When Pins 3 and 6 of the TELCO jack (Models 3810 and 3820) are connected then disconnected, the modem
goes off-hook and looks for the answer sequence from the remote modem. If the sequence is detected, the local modem
will handshake and connect with the remote modem. A 26-pin D-Lead control connector is located on the rear of the
3000 Series Carrier. This connector is used for MI/MIC Dialing for Model 3811 modems.
The factory default is Disable.
AT command is S-register S83 =
n
, where
n
is 0 for Disable and 1 for Enable.
- COMSPHERE 1
- 3800 SERIES MODEMS 1
- MODELS 3810, 3811, AND 3820 1
- Printed on recycled paper 2
- Important Safety Instructions 3
- 1 modems 4
- United States 5
- Safety Instructions 7
- Table of Contents 10
- List of Figures 11
- List of Tables 12
- Objectives and Reader 13
- Assumptions 13
- How to Use This Manual 13
- Related Documents 13
- Introduction 14
- Features 15
- COMSPHERE 3800 Series 15
- 3800 Series Modem Package 17
- Model 3810 or Model 3820 18
- Modem Installation 18
- DTE Connection 19
- Dial Network Connection 21
- Model 3810 Dial-Line 21
- Connection 21
- Model 3820 Dial-Line 21
- Modem Power-Up 23
- Removing and Replacing 23
- Model 3810 and 23
- Model 3820 Modems 23
- Model 3811 Installation 24
- Model 3811 Modems 27
- DCP Operation 28
- Figure 4-1. Model 3810 DCP 29
- Figure 4-2. Model 3820 DCP 29
- Diagnostic Control Panel 30
- Status Indicators 31
- Diagnostic Control 33
- Panel Operation 33
- Menu Structure 34
- Top-Level Menu Status and 35
- Operational Messages 35
- MR* EC** 37
- Selecting Factory 40
- Configuration Options 40
- Using the Diagnostic 41
- Control Panel (DCP) 41
- Security Access 42
- Call Setup Branch 43
- Dial Standby/Return to Dial 46
- Talk/Data Branch 49
- Status Branch 51
- Test Branch 56
- Configure Branch 63
- 494-13080-02 65
- Configuration 69
- Table 9-1 70
- (1 of 7) 70
- (2 of 7) 71
- (3 of 7) 72
- (4 of 7) 73
- (5 of 7) 74
- (6 of 7) 75
- (7 of 7) 76
- DTE Dialer 77
- Table 9-2 78
- (2 of 5) 78
- (3 of 5) 79
- (4 of 5) 80
- (5 of 5) 81
- Line Dialer 82
- Table 9-3 83
- (2 of 6) 83
- (3 of 6) 84
- (4 of 6) 85
- , Installation Manual 86
- Dial Line 88
- Table 9-4 89
- (2 of 3) 89
- (3 of 3) 90
- Leased Line 91
- Table 9-5 92
- V.42/MNP/Buffer 96
- Table 9-6 100
- (5 of 6) 100
- (6 of 6) 101
- Test Configuration Options 103
- Table 9-7 103
- (2 of 2) 103
- COMSPHERE 3800 Series Modems 104
- Table 9-8 105
- (2 of 4) 105
- (3 of 4) 106
- (4 of 4) 107
- Security Configuration 108
- Table 9-9 109
- Control Branch 110
- AT Command Equivalent 111
- Clone To Remote 113
- Automatic Firmware 115
- Download 115
- Remote Branch 116
- Security 119
- VF-Side Passwords 120
- Command Set and S-Registers 121
- Security Branch 122
- Administrative Password 123
- EditPasswdTable 124
- Table 12-1 125
- Set Answer Sec 126
- Set Orig Sec 127
- Set Admin PsWd 128
- Security Password 129
- Entry Techniques 129
- Database 130
- Fax Operation 133
- Overview 135
- Operating Modes 135
- Command Guidelines 136
- AT Command List 136
- AT Command Format 137
- Dial T 140
- Break Send Break 146
- Buffer Break Forces 146
- Control Control Escape 146
- Control Control of 147
- of DTE Modem 147
- S-Register List 149
- Table 14-2 150
- (1 of 11) 150
- 3800 Series S-Registers 150
- S-Register 150
- (2 of 11) 151
- (3 of 11) 152
- (4 of 11) 153
- (5 of 11) 154
- (6 of 11) 155
- (7 of 11) 156
- (8 of 11) 157
- (9 of 11) 158
- (10 of 11) 159
- (11 of 11) 160
- Menu Tree 161
- 495-14436b-01 163
- Result Codes 165
- Table B-1 166
- Troubleshooting 167
- Table C-3 169
- Modem – VF Connection 169
- Symptom Action 169
- Technical Specifications 171
- Table D-1 172
- Specifications Description 172
- Pin Assignments 175
- EIA RS-366-A Pin 177
- Assignments 177
- VF Connector Pin 178
- Configure Branch 180
- Call Request Commands 181
- Call Response 181
- Incoming Call (INC) 182
- Disregard Incoming Call (DIC) 182
- Connect Incoming Call (CIC) 182
- Command Response 183
- Default Configuration Options 185
- Equipment List 189
- Glossary 190
Související produkty a manuály pro Modemy Paradyne COMSPHERE 3800 Series Modems 3810
Modemy Paradyne 3910 Uživatelský manuál
(244 stránky)
(244 stránky)
Modemy Paradyne 3800 Uživatelský manuál
(213 stránky)
(213 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.363 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce